µtorrent 1.7.2 Leecher Pack Build 3458
Features:
µtorrent 1.7.2_mult10_leecher.exe
- upload reported to tracker with multiplicator 10
µtorrent 1.7.2_mult10_seeder.exe
- upload reported to tracker with multiplicator 10
- download not reported to tracker
- you shown as seeder
- complete flag not send to tracker (no snatchlist entry)
µtorrent 1.7.2_mult100_leecher.exe
- upload reported to tracker with multiplicator 100
µtorrent 1.7.2_mult100_seeder.exe
- upload reported to tracker with multiplicator 100
- download not reported to tracker
- you shown as seeder
- complete flag not send to tracker (no snatchlist entry)
µtorrent 1.7.2_noreport.exe
- upload and download not reported to tracker
- complete flag not send to tracker (no snatchlist entry)
- you will shown as 0 % finished
µtorrent 1.7.2_report.exe
- only upload reported to tracker
- you shown as seeder
- complete flag not send to tracker (no snatchlist entry)
µtorrent 1.7.2_stealth.exe
- you are not shown on tracker during filetransfer (no peerlist entry)
- Caution: works not on all tracker !!!
µtorrent 1.7.2_DHT.exe
- private flag will be ignored
- DHT always enabled
Made by seba14 !!
visit
www.seba14.org
Have Fun :-)
Download + Mirrors: DDL1 - DDL2 - DDL3 - DDL4
FileShare Hosting Mirrors1 - Mirrors2
utorrent 1.7.2 LP.7z (554.16 KB) - Mirror
All credits to seba14.org İstanbul!
4 comments:
Ist das auch ohne " Call Home " ????
Wenn nicht wäre net schlecht wenn mal einer diese Funktionen verbindet. THX
Bin nicht so ein supper Coder. Weis nicht was ich da wirklich machen soll. Diese Meinung das da nichts dran ist find ich gut, denoch ist das Programm auf einigen Trackern gespert. Wie kann ich das Umgehen?
Not yet any mods without call homes and suspected IP's. un-pecompact, un-upx it. Make the changes as written by secure mod.
Open utorrent with a Hexedior
search 1.7 and replace 7 with 6
so that it looks 1.6
latter below the bittorent protocol part after the search engines in code
maybe 20 to 60 lines down difficult
most coder uebersehen es there is
1..7.. this must be changed to 1..6
attention if you use uT 1.7.2 it will be the result uuT 1.6.2 to spoof the client. By 1.7.2 you must change of course the third .2 with .1
A guide how to spoof uT 1.7.x to 1.6.0 or 1.6.1 follow soon here.
Till now there been not one propper done emulation since uT Extreme LP
In detail there are %d var (id) following whitch are to cut. Most tracker work with the "generic" used methodes
Post a Comment
We would appreciate if you as readers of our blog, show us some feedback by signing up to this site with Friend Connect.
This will encourage us to publish updates in the future.